Details of Zeayeto Hydrogen and oxygen carbon removal machine
publisherKarry
time2019/03/14
The hydrogen-oxygen carbon removal machine is a machine that utilizes the catalytic characteristics of the hydrogen-oxygen gas, the combustion-supporting characteristics, the high-temperature characteristics of the hydrogen-oxygen flame, and the characteristics of the hydrogen-oxygen flame-generating water to remove the volumetric carbon inside the automobile engine. In fact, it is a hydrogen-oxygen generator and some accessories. Using water as raw material, electricity is decomposed into hydrogen and oxygen by electricity, hydrogen is used as raw material, oxygen is used for combustion, and is sent into the interior of the automobile engine through the air inlet, and is mixed and burned with gasoline and air. The oxy-hydrogen gas mixture is equivalent to a catalyst for gasoline combustion. It is a qualitative leap in the field of car maintenance.
Features
1. Boost power:improve engine output horsepower, power increased by 10%-15%， acceleration significantly improved.
2. Save money:save carbon by 3%-15% immediately after carbon removal, saving high fuel costs.
3. Safety clean:high safety, no carbon pollution, high environment protection.
4. Extend the age of the car:maintenance of auto parts to extend engine life.
5. Reduce sewage:reduce 30%-60% of dirt emissions
6. Smooth driving:improve engine jitters and improve ride comfort.
Working Principle
Using water as raw material, electricity is decomposed into hydrogen and oxygen by electricity, hydrogen is used as raw material, oxygen is used for combustion, and it is sent into the interior of the automobile engine through the air inlet, and is mixed with gasoline and air.
Parameter
Gas production: 1500L/H±10% | Working pressure:≤0.20Mpa |
Control panel:LCD touch screen | The control mode:PLC automatic control |
Usage scope:0.8~0.6L(gasoline or diesel engine) | Electrolyte consumption:≤240G/H |
Cleaning cycle:20~60 min(adjustable) | Ambient temperature range:5℃~50℃ |
Altitude range-sea level to:2400m | Voltage:AC 220V |
Frequency:50/60H | Power:<6kw |
Weight:120KG/SET | Dimension(L*W*H):1100mm*600mm*600mm |
Why should do carbon cleaning for car？
There are many reasons for increased carbon deposition:incomplete combustion, poor oil quality,bad driving habit, long time low speed driving, poor air quality etc.The increased carbon deposit will heavily effect the vehicle performance, resulting in 90% of engine component failures, fuel consumption increased, excessive exhaust emission.
How the machine works?
The hydrogen-oxygen carbon removal machine uses water as a raw material, and decomposes water into hydrogen and oxygen by electricity, uses hydrogen as a raw material, assists combustion with oxygen, and is sent into the interior of the automobile engine through the air inlet to be mixed and burned with gasoline and air. The oxyhydrogen gas mixture is equivalent to a catalyst for gasoline combustion.
Usage Steps
1. Open the power control switch on the rear of the carbon removal machine
2. Connecting the pipeline
3. Start the car engine and keep the vehicle at idle speed
4. Select the working mode and displacement to start decarbonization
5. Dosing requirements
6. When the carbon is over, shut down the machine and restore the pipeline
1.The idling speed is stable and uniform, and the sound is sweet in the engine running.
2.Car power recovery, smooth power.
3.Rapid acceleration during, full of power.
4.Fuel consumption is reduced (fuel efficient).
Effect
After the use of the hydrogen and oxygen decarbonizer, the carbon deposits are effectively cleaned, the exhaust emissions are greatly reduced, the engine power is restored, and the fuel consumption of the vehicle is reduced.
Compared with traditional carbon removal methods.
| Hydrogen oxygen machine | Traditional dis-assembly engine | Manifold suction cleaning fluid | Water-based foam detachable |
Carbon removal time | 20 minutes | About 2 to 4 hours | 40 minutes | 40 minutes |
Environmental protection | Complete combustion, non-toxic and harmless | Carbon particles, not easy to handle waste | Toxic and harmful exhaust | Not easy to handle waste |
Advantages and disadvantages | The engine can be idling | Time-consuming, destroying the original assembly, cleaning intuitive | The engine is running at an idle speed, and the medicament is continuously inhaled | The implementation process is cumbersome and the carbon is incomplete |
Cost | Carbon cost | Dis-assembly of engine time, oil, oil filter, antifreeze | In addition to carbon, oil, oil filters | In addition to carbon, oil, oil filters |
How to make more money
If you removal carbon from 5 cars a days, each car has 60 USD in addition to carbon, then you can earn 3000 USD every day, you can earn 9000 USD every month, and earn 108000 USD a year.
Certificate
Why choose us
1. Good quality, preferential price
We adhere to the principle of quality first and provide customers with quality products.
2. Ten years of technology precipitation, trustworthy
We focus on the development and production of automatic transmission oil changers, which have been continuously created and continuously improved over the past decade.
3. Quality service
Profession pr-sales and after-sales service team, customer-center, to provide you with peace of mind, heartfelt service.